•  4X LED INDICATOR
•  4X MIC OUT (TO STUDIO)
•  4X MIC ON-AIR ARM
•  GPI STUDIO
•  2 WAYS TO SWITCH THE MIC ON-AIR SWITCH
     5VDC CONTROL VOLTAGE (10MA)
     OPEN AND CLOSED CONTACT
•  12VDC POWER INPUT
  

Suitable for signalling of on-air lamps for microphones. e.g. YELLOWTEC MIKA ON-AIR MIC ARM.
ON-AIR = red
OFF-AIR: white

STATUS LED INDICATOR
The LED will light up when the 12VDC power supply is present.

12VDC POWER INPUT
Ratings: 12VDC (9~18 volt) at 250mA. The polarity is not important
Power supply is included, options: 115V/USA - 230V/AUS - 230V/EUR - 230V/UK

4x MIC OUT (TO STUDIO)
Microphone output; connect to your equipment with standard MIC cable (XLR 3pin)
 - PIN1: Ground (Shield)
 - PIN2: Positive (Red)
 - PIN3: Negative (Blue)

4x MIC ON-AIR ARM
Connect to the MIC ON-AIR ARM with standard MIC cable (XLR 5pin)
 - PIN1: Ground (Shield)
 - PIN2: Positive (Red)
 - PIN3: Negative (Blue)
 - PIN4: LED (Yellow)
 - PIN5: LED (Black)